The Vostro 200 uses an Intel ICH9 controller. As mentioned in Asianux Server 3 SP1 and SP2 release notes, you need to set the SATA mode to RAID in the BIOS.

Turn on your machine.
Access the BIOS: press F2.
Set the SATA mode to RAID:

Integrated Peripherals -> SATA Mode -> RAID
 
Save and reboot.
Install Asianux Server 3 ...

On a machine running with Xen kernel:

1) run virt-manager
2) choose para-virtualization
3) install ax30 as guest OS. Choose Max Installation.
4) in a terminal, boot the guest OS (AXS3) with the following command:

xm create -c NAME_OF_GUEST_OS

5) in the guest OS, modify  the grub, setting xen kernel as default kernel in the g...

In order to run Asianux Server 3 for x86 & x86-64 on Intel Caneland platform server with Dunnington CPU, please make sure that the server`s BIOS version is at least up to SFC4UR.86B.01.00.S004.031420081443 so that the OS runs stably.

The HP DL585 G2 uses an embedded dual-port NC373i(BNX2) ethernet card. When installing Asianux 2.0 sp2 x86_64 & x86 on it with default parameters, the ethernet card can not be found.  The solution is in two parts.  The first is to set some options in the BIOS.  The second is to use the kernel boot parameter "pci=nommconf" when installing OS.

 Follo...

You can try to change the option `USB External Port Capability` to `USB 2.0` in the BIOS

Please refer to the following figure:

Asianux 2.0 SP2, x86_64 Edition pre-installation setup:
First disable the 8042 Emulation Support BIOS Setup field before installing the Linux OS. Follow the steps below.
1. Turn on the monitor and the server.
2. During POST, press F10 to access&...

Because Apache is carrying out reload action now, it may appear some problem if restart at once.

If it appears this kind of situation, you can kill the existed process httpd, and then restart; or restart service again

This is because that network which server locates does not appear in the subnet which is defined in configuring file.

Please examine IP address of server, set up a new subnet on the network where this server locates, and activate network connection of server.

This is because that it does not define subnet in shared-network.

It needs to set up a new subnet by using mistaken shared-network as parent node.

This is because that it does not point out dynamical DNS updating scheme in configuring file.

Please select appropriate dynamical updating scheme in DNS page of DHCP server attribute dialog box.